BOOTMOD3 S55 BETA - BMW F80 F82 M3 / M4
World's first custom mobile flash tuning platform for the BMW F series. Developed and tested in-house from the ground up over the course of almost 2 years with more features being added regularly makes the bootmod3 platform a custom BMW factory DME tuning solution like no other on the market today.
Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
bootmod3 app and cloud services offer many unique features not found in any other flash tune including and currently available:
Mobile app (iOS and Android) and Web (http://www.bootmod3.net)
One OTS map/tune included with the purchase
Datalogging over 200 diagnostic channels, up to 40 channels concurrently
Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
DCT TCU (transmission) flash for maximized clutch clamping force extending life on stock and upgraded DCT clutch packs
Cloud based storage for map data and datalogs
Reverting back to stock performance map
Live Dash - realtime vehicle parameter monitoring via in-app guages
GTS TCU Flash for DCT vehicles
Read and clear trouble codes in all vehicle modules
Reset learned adaptations (octane, knock, Valvetronic, etc)
ECU power reset
(Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane at $100 per map (SEE HERE)
(Optional) Custom tuning for non-standard vehicle hardware and alternative fuels such as E85 and race gas
Customization of an existing OTS map $300 per map
Prior OTS map purchase required
Some of the map features provided:
- Top speed (VMAX) limiter removal
- Higher rev limiter
- GTS Startup Roar
- Cold start cat heat cycle removed (for off-road use)
- Cat efficiency check removed (for off-road use)
- Exhaust valve control and overrun (burble)
- Maps for upgraded Stage 1 and Stage 2 turbos
- E85/blend, race gas and meth injection tuning
- Custom Throttle mapping
- Backend Flash maps for use with piggybacks such as the JB4
For more info take a look at the FAQ here!
*** OBD ENET cable required, available separately
*** bootmod3 OBD Agent device is recommended but not required to use the bootmod3 platform. It removes the need for a laptop in the car for using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring while reducing cost then using your laptop instead of our device may be the ticket for you.
*** OBD unlock software patch for the DME is required, see FAQ.
For more information please email us at firstname.lastname@example.org or refer to our Instagram and Facebook accounts.
NOTE: If removing DME, ensure battery is disconnected.
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by CEDAR PERFORMANCE may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. CEDAR PERFORMANCE makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.